AMP to D2S Adapter Plug for Aftermarket Ballast Application or Retrofit Project



A lot of newer version vehicles are using stock Xenon HID.  The most commonly use light bulb sizes for stock HID are D1S and D2S.  Stock HID works pretty much the same as aftermarket HID kit, they have a pair of ballasts to ignite the HID bulbs.  However, stock HID ballasts are very expensive to replace, and if you have defective stock ballast, you might want to apply aftermarket ballasts instead of spending couple hundreds to replace your stock ballasts.  And here is the plug that allows you to apply D2S HID bulbs to aftermarket ballasts:

D2 ADP 001 2PC AMP to D2S Adapter Plug for Aftermarket Ballast Application or Retrofit Project

Basically, these AMP to D2S converter and made of two connector ends.  The red connector is directly connected to your D2S:

amp d2s d2r d2c adapter plug connect to aftermarket ballast 1 300x199 AMP to D2S Adapter Plug for Aftermarket Ballast Application or Retrofit Project amp d2s d2r d2c adapter plug connect to aftermarket ballast 3 300x199 AMP to D2S Adapter Plug for Aftermarket Ballast Application or Retrofit Project

And the other end is connected to aftermarket ballasts.  ( Modifystreet carries regular ballasts in slim ballasts as well ):

amp d2s d2r d2c adapter plug connect to aftermarket ballast 2 300x199 AMP to D2S Adapter Plug for Aftermarket Ballast Application or Retrofit Project amp d2s d2r d2c adapter plug connect to aftermarket ballast 4 300x176 AMP to D2S Adapter Plug for Aftermarket Ballast Application or Retrofit Project

The connection is very straightforward.  You just need to locate a good spot to hold the aftermarket ballasts under the hood, and that’s it for installation!

Of course, these plugs can be used in more advanced purpose such as retrofit project.  If you are doing retrofit headlights for your vehicle, a lot of times you will need to apply D2S HID for the light bulbs.  If you have good budget, you can consider to get stock ballast for installation, but if you want to apply aftermarket ballast, you will definitely need these D2S adapter plug for your project as well.

amp d2s d2r d2c adapter plug connect to aftermarket ballast 6 AMP to D2S Adapter Plug for Aftermarket Ballast Application or Retrofit Project

amp d2s d2r d2c adapter plug connect to aftermarket ballast 5 AMP to D2S Adapter Plug for Aftermarket Ballast Application or Retrofit Project

Posted by at July 13, 2012
Filed in category: HID Kit, and tagged with: , , , , , , ,

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>

  • RSS
  • Facebook
  • Google+
  • Twitter
  • YouTube
  • Pinterest